volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Control Module, Replacement [MMMM]|Page 5408 > < Control Module, Replacement [MMMM]
Page 2
background image

[MMMM4]

Installing control module

Center the control module relative to the hydraulic unit valves before pushing them into place.

- Install control module and tighten bolts to 1.8 Nm (1.3 ft lb).

Connect:

- Pump motor and control module connectors.
- Air filter casing and hose to air heater.

[MMMM5]

Function check

- Read out any DTCs which are posted in the control module and replace them.
- Switch off Volvo ST.

Check that ABS warning light stops flashing.

- Test drive the car.

Check that no new DTCs are posted.

Warning!

The ABS and EBD systems are not available while Volvo Diagnostics is activated. Take great care when test driving as there is a serious
risk of the wheels locking.

Control Module, Replacement [MMMM]|Page 5408 > < Control Module, Replacement [MMMM]