V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Piston: Service and Repair
Crank, Pistons and Rods, Dismantling
1. Remove oil pan:
-
Remove oil filter.
-
Remove pan carefully by tapping it loose with a rubber mallet.
2. Remove oil pan suction pipe:
-
Clean and inspect pipe and filter.
-
Remove suction pipe O-ring.
-
Remove oil passage O-rings.
3. Remove intermediate section:
-
Using the illustration above, undo intermediate section 7 mm and 8 mm bolts in sequence from number 6 to number 1.
-
Then undo all 10 mm bolts from number 6 to number 1.
-
Tap intermediate section loose carefully with a plastic mallet.
-
Remove crankshaft rear seal.
CAUTION: Do not allow crankshaft to rotate.