V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Engine Mount: Service and Repair
Special Tools:
-
Jack tool No. 998 5972, or equivalent
NOTE: For additional information on special tools and equipment used in this procedure, refer to Service and Repair. See: Tools and Equipment/Tools
For Engine Service and Repair
Procedures
NOTE: Refer to the following for mount replacement:
-
Front Engine Mount (Manual): refer to steps 1 through 5
-
Front Engine Mount (Automatic): refer to steps 6 through 9
-
Right Engine Mount: refer to steps 10 through 11
-
Rear Engine Mount: refer to steps 12 through 15
-
Tightening Engine Mounts: refer to step 16
Front Engine Mount Replacement (Manual Transmission)
1. Undo torque rod:
-
Remove torque rod bolt from engine.
-
Slacken torque rod bolt from body mount and push to one side.
2. Remove nut from engine mount.
3. Remove:
-
splashguard under engine
-
torque rod screw
-
engine mount screw