V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Drive Belt: Service and Repair
Replacing the Auxiliaries Belt / Belt Tensioner
Auxiliaries belt/belt tensioner, replacing
Note!
As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the auxiliaries belt
Remove:
-
the plastic cover on the blet tensioner using a small screwdriver. Use a wrench and turn clockwise as far as possible to relieve the load on the belt.
-
the belt.
Replacing the belt tensioner
Remove:
-
both mounting screws from the auxiliaries belt bracket for the belt tensioner.
-
the belt tensioner. Install the new belt tensioner. Tighten to 25 Nm (18.4 ft lb)
Installation
Installing the auxiliaries belt
Caution!
Ensure that the belt is correctly seated in all the grooves on each pulley
