V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Remove:
-
middle section of control module box, pry out metal clips (three) using a screwdriver.
-
sleeve connector to control module box air intake.
Lift up control module holder with the cable duct to release it from the clips.
GC4 Disconnecting Connector:
Remove:
-
connector at the bottom of the control module box.
-
screws for the clamp on the side of the control module box.
Pull up cable on the side of the control module box.
GC5 Removing Lower Section of Control Module Box: