volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Fuel Sending Unit - Installation|Page 3977 > < Fuel Sending Unit - Installation|Page 3975
Page 1
background image

Fuel Gauge Sender: Adjustments

Fuel Level Sensor Not Centered:

JA6 Preparations:

If the level sensor nut is not centered in the hole in the panel, the fuel tank should be slackened off and centered.

JA7 Adjusting Fuel Tank:

-

Raise the car.

-

Slacken off fuel tank straps and press the tank forward by hand as far as it will go.

-

Lower the car.

JA8 Further Adjustment:

-

If the fuel tank needs further adjustment use the shaft of a hammer as a lever between the nut and panel. Take care not to damage the nut or panel
when levering! 

-

Remove the nut and level sensor. See: Service and Repair

JA9 Tightening Fuel Tank:

Fuel Sending Unit - Installation|Page 3977 > < Fuel Sending Unit - Installation|Page 3975