V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Adjustment Of Link
^
Slacken link locknut (A) sufficiently to permit link to be separated and to spring back easily to innermost position.
^
Mount link in position.
^
Check that throttle spindle is in contact with adjusting screw (B) and that pulley is seated against idling stop (C).
^
Tighten link locknut (A).
^
Rotate pulley to check that link seats against adjusting screw (B) before pulley seats against idling stop (C).
Check / Adjust Throttle Pulley And Cable
^
Pulley should move easily without sticking.
^
Lubricate with petroleum jelly if needed.
^
Cable should be taut in idling position but must not affect pulley position.
^
Pulley should seat against idling stop.
^
Adjust cable as required.
^
Press Accelerator Pedal (AP) to floor and check that pulley seats against full-load stop.
