V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Installing Brake Components
Install:
-
brake caliper. Use new screws. Tighten to 60 Nm (44 ft.lb.)
-
ABS sensor. Lubricate mounting hole first. Tighten to 10 Nm (7.4 ft.lb.)
-
parking brake cable clamps
-
counterhold 999 5540. Lubricate drive shaft nut
-
new drive shaft nut. Tighten to 120 Nm (88.5 ft.lb.), angle-tighten to 600.
-
Remove counterhold.
-
Check oil level in final drive. Top up if necessary. P/N oil, 1161329-6.
-
Install wheel according to Tightening wheel studs page 11.
