V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
-
Carefully pull apart the sides of the holder for the connector at the ends so that the connector can pass by the catches
-
Pull the connector out.
-
Position the red/white (R/W) single cable with the larger cable terminal facing backwards along the cable. Insulate the cable. Secure the cable
using the foam tape from the kit. It must not come into contact with the chassis.
-
Connect the pre-routed red/white (R/W) cable to position 8 in the connector
-
Reinstall the connector in the holder. Reinstall the entire unit in the fuse holder.
Installing and connecting the CD changer
-
Check that the catches (1, 2) point towards the mark V, (vertical position). If not, move the catches to mark V.
