V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
-
Take the connector holder from the kit.
-
Place the connector in the holder and press the two halves of the holder together.
Note! Make sure the protective cover retaining strap is not pinched but is positioned in the recess in the connector holder.
-
Take the bracket, the two smaller bolts and the nuts from the kit.
-
Secure the bracket to the connector holder.
-
Mark the location of the drill hole for the connector bracket as illustrated.
-
Pre-drill with a smaller drill bit. Enlarge the hole with a -6.5 mm (1/4") drill bit.
-
Remove any swarf. Rust-proof the edges of the holes.