V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
-
Secure the cable harness to the cable harness behind the battery with tie straps (3) from the kit.
-
Connect the routed ground cable to the grounding point (4) behind the battery and tighten the grounding screw securely.
-
Detach the trailer module (TRM) from the Velcro fastener on the back side of the plate in front of the fuse holder.
-
Plug in the tow bar wiring connectors:
-
green (GN) and grey (GR) connectors to the control module.
-
black (SB) connector to the fuse holder.
-
Reinstall the control module.
-
Secure the excess cable with a tie strap from the kit.
-
Insert fuses from the kit in the following positions in the fuse holder (REM):
-
20A in position 20 (mini fuse) if the charging function according to step Tow bar wiring, 7-pin See: has been selected
-
25A in position 29
-
25A in position 30
-
Plug in the connectors for sill trim panel lighting and reinstall the panel.
-
Reinstall the folding panels.
-
Reinstall the cargo compartment carpet.