V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
-
the screws (1), 1 per side.
-
the 2 x front screws.
-
the 6 clips, on the upper side of the bumper cover.
-
the 2 clips on the underneath of the bumper (5).
Pull the bumper forward while pulling both the sides.
outwards so that the edge releases from the side bracket.
HINT: This operation is easier with two people.
Separate the connector for the fog lamp.
Repeat the procedure on the other side.
Disconnect the quick-release connector for the headlamp washer (if applicable).
Transferring components
