volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Rear Subframe|Service and Repair|Page 31040 > < Rear Subframe|Service and Repair|Page 31038
Page 5
background image

Note! There is some tension in the shock absorbers.

Remove:

-

the shock absorbers (on both sides) from the control arms

-

the screws for the mountings for the lateral link

-

the lateral link on both sides

-

the anti-roll bar link from the upper control arm (both sides).

Removing the position sensor (Four-C only)

Remove the position sensors. See Position sensor suspension rear (Four-C), replacing See: Sensors and Switches/Sensors and Switches - Steering and
Suspension/Sensors and Switches - Suspension/Ride Height Sensor/Service and Repair.

Removing the screws from the track rods and control arms

Remove:

-

the track rod

-

the control arm. First press the control arm outwards. Move it downwards at the inner mounting.

-

the control arm

-

the link for the lower control arm against the sub-frame.

Rear Subframe|Service and Repair|Page 31040 > < Rear Subframe|Service and Repair|Page 31038