V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
Install:
-
a new gasket held in position by the lower screws for the intake manifold. Do not forget the clamp for the fuel line at the screw in the lower
row.
-
the nipple for the water heated crankcase ventilation
-
the intake manifold. Do not forget the crankcase ventilation hose. The hose must be inserted up through the gap between the second and third ducts
-
the 3 upper screws. Torque tighten all the screws starting from the center.
Finishing
Install:
-
the fuel rail. Compress the quick-coupling, see also: Fuel line, lock See: Powertrain Management/Fuel Delivery and Air Induction/Fuel
Rail/Service and Repair. Use new screws. See also: Fuel system, quick-release connectors See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Line Coupler/Description and Operation
-
injector connectors
-
the protective cover over the fuel rail
-
the vacuum hoses according to the earlier markings
-
the plastic charge air pipe between the throttle body (TB) and the charge air cooler (CAC)
-
the connectors to the throttle body (TB)
-
the dip stick in the intake manifold.
Final check
Test drive the car. Check the following:
-
that there is no fuel leakage
-
that the engine operates normally.
Check that everything is in position. Clean the engine compartment.