V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
Clean thoroughly around the connectors.
Remove the connector and the back-up lamp switch from the gearbox.
Installation
Installing reversing lamp switch
Install the back-up lamp switch. Tighten. See relevant specifications.
Installing the leads
Install the cables in the connector with the opening for the primary lock facing up as illustrated. Press in the secondary lock.
Joining cables
Splice the new connector with cables to the existing wiring. See: Joining the cables See: Diagrams/Diagnostic Aids/Wiring/Joining the Cables
Installing connectors