V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
Air Flow Meter/Sensor: Service and Repair
Mass air flow (MAF) sensor, replacing
Removal and Installation
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Removing the air cleaner (ACL)
Remove:
-
the turbocharger control valve from the air cleaner (ACL) housing
-
the screws in the front panel for the inlet hose
-
the screws in the air cleaner (ACL) housing for the inlet hose
-
the inlet hose
-
the nuts for the air cleaner (ACL) housing
-
the hose clamp for the mass air flow (MAF) sensor. Disconnect the connector for the mass air flow (MAF) sensor
-
the air cleaner (ACL) assembly.
Removing the mass air flow (MAF) sensor
Remove:
-
the screws for the mass air flow (MAF) sensor
-
the mass air flow (MAF) sensor.
Installing the mass air flow (MAF) sensor
Install:
-
the mass air flow (MAF) sensor
-
the screws. Tighten.
-
air cleaner (ACL) assembly
-
the hose clamp for the mass air flow (MAF) sensor
-
the nuts for the air cleaner (ACL) housing. Tighten
-
the inlet hose