volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Control System, Replacing|Page 13611 > < Control System, Replacing|Page 13609
Page 3
background image

Use new screws and a new gasket.
Lightly tighten.

Tighten alternately, M6.

Installing the cable harness

Install the cable harness for the control system. See: Cable harness, control system, gearbox, replacing See: Automatic Transmission/Transaxle/Wiring
Harness/Service and Repair.

Control System, Replacing|Page 13611 > < Control System, Replacing|Page 13609