volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Changes Introduced Up to and Including April 2006|Page 13777 > < Changes Introduced Up to and Including April 2006|Page 13775
Page 3
background image

Caution! Do not touch the terminal pins on the control module with your fingers. Components in the control module can be damaged by static
electricity.

Remove:

-

the connector (1), x1

-

the nut (3), x1

-

the gear selector lever

-

the bolts (2), x3

-

the control module carefully, so that the pins are not damaged.

Installation

Note! For tightening torques, see applicable specifications.

Installing the Transmission Control Module (TCM)

Changes Introduced Up to and Including April 2006|Page 13777 > < Changes Introduced Up to and Including April 2006|Page 13775