V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
Marking the position of the adjustment nut
Mark the position of the adjustment nut in relation to the housing with a scriber.
Measure the height between the nut and housing. Make a note of the measurement.
Remove screw and split pin.
Removing the adjustment nut
Remove the adjustment nut.
Use wrench 999 5371 NUTS-DIFF.BEARING) 1035 See: Tools and Equipment/999 5371 Nuts-Diff.Bearing) 1035.
Removing the sealing ring
Tap out the sealing ring.
Use a screwdriver.
Installing the sealing ring