V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
Install the gear selector lever knob on the gear selector lever. Press the gear selector lever knob down. At the same time turn a quarter turn to the right.
Check the gear selector lever position in the space ball. It should be in the middle of the space ball. If the gear selector lever is not in the correct position,
check the transmission cable. See Transmission cable, adjusting, B5244T5, M66 See: Manual Transmission/Transaxle/Shift Linkage/Shift
Cable/Adjustments.
Top Panel, Gear Selector Assembly, Replacement
Top panel, gear selector assembly, replacement
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.
Removal
Removing the gear lever knob
