V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
Installing the sealing ring
Install the sealing ring for the connector seal.
Lubricate the seal using the wheel bearing grease, P/N 116 1241-3.
Use drift 999 5657 Punch See: Tools and Equipment/999 5657 Punch.
Tap in the seal until the drift bottoms on its stop against the gearbox.
Use: Adhesive, part no. 116 1370
Installing the snap ring and connecting socket
Install:
-
the circlip for the socket
-
the sleeve in gearbox with the long splined section (2) toward the gearbox.
Use a rubber mallet to knock in the sleeve.
Finishing
See Bevel gear, replacing, B5254T2, M58, B5254T2, AW50/51 AWD See: Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/Automatic Transmission Components/Bevel Gear, Replacing Bevel gear, replacing See: Automatic Transmission/Transaxle/Service and
Repair/Removal and Replacement/Automatic Transmission Components/Bevel Gear, Replacing Bevel gear, replacing See: Automatic
