volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Removal and Replacement|Page 15141 > < Removal and Replacement|Page 15139
Page 10
background image

Install:

-

the gear selector cables on the levers on the gear selector assembly. Press the cable sleeves onto the gear selector assembly by hand

-

the gear selector assembly on the bodywork (M8)

-

the connector on the gear selector assembly.

Finishing

S60 and V70

Install the gear selector lever knob. See: Gear selector lever knob, replacing See: Gear Selector Lever Knob, Replacing.

Install the center console. See: Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console,
Replacing.

Gear Selector, Replacing

Gear selector, replacing

Special tools:

999 5724 Cover  See: Tools and Equipment/999 5724 Cover 
999 7077 Jimmy bar See: Tools and Equipment/999 7077 Jimmy Bar 

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.

Removal

Ignition off

Warning! Avoid skin contact with transmission fluid.

Removing engine compartment components

Removal and Replacement|Page 15141 > < Removal and Replacement|Page 15139