V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Installing heated oxygen sensors (HO2S)
Install:
-
the heat deflector plate
-
the heated oxygen sensors (HO2S). Use tool 999 5543, Socket NV -22. Tighten to 45Nm
-
the bracket for the right-hand heated oxygen sensor (HO2S) cable
-
the tie strap holding the wiring for the heated oxygen sensors (HO2S) to the transmission dipstick
-
the preheating pipe.
15
Installing the crossmember
Install:
-
the engine stabilizer brace. Tighten the four screws on the suspension turrets. Tighten to 50Nm.Tighten the screw in the torque bracket. Tighten to
80Nm
-
the servo hose to the engine stabilizer brace using a tie strap.
16
Installing the exhaust system