volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Harmonic Balancer - Crankshaft Pulley > < Engine - Cylinder Block Seal Plug Installation|Page 1951
Page 8
background image

Install:

-

new gaskets on the manifold flanges. Connect the front exhaust pipe to the manifolds. Lubricate the threads. Use paste 1161408. Use new nuts.
Tighten to 25 Nm.

Press the brake pipe into the clip on the front SIPS member.

Press up and install the front SIPS member. Tighten to 25 Nm.

Install:

-

the lower engine cover.

WARRANTY STATEMENT: 
Claims may be submitted under the New Car Warranty when there is a documented customer complaint, using claim type 01.

Harmonic Balancer - Crankshaft Pulley > < Engine - Cylinder Block Seal Plug Installation|Page 1951