V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Throttle Body: Adjustments
ADJUSTMENT OF THROTTLE BODY AND PULLEY
Adjustment of Throttle Body
^
Disconnect link.
^
Remove Throttle Body (TB) from intake manifold.
^
Remove Throttle Position (TP) Potentiometer from TB.
^
Clean TB carefully.
^
Slacken adjusting screw so that throttle closes fully.
^
Slacken throttle disc mounting screws slightly.
NOTE: Check that disc is correctly installed i.e. is facing in the right direction. Since edge of disc is thin, careful inspection is necessary to see
chamfered edge.
^
Open throttle about one-third using throttle lever.
^
Release throttle lever quickly so that throttle disc centres itself in throat of opening. Hold TB against light and check that gap is even all round.
^
Check that throttle spindle can be moved backward and forward with slight resistance. Adjust spindle until end projects 13.85mm ± 0.3mm
(0.55in ± 0.15in) beyond TB as illustrated.
^
Tighten throttle disc mounting screws to 0.8 - 1.0 Nm (0.59 - 0.74 ft lb).
