V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Installing Propeller Shaft
Install Propeller Shaft To Flange
NOTE: Install propeller shaft as marked. Use new screws of the same length. Reinstall screws in the same positions.
-
Check that viscous coupling and propeller shaft flange mating surfaces are clean.
-
Tighten screws crosswise to 8 Nm (5.9 ft.lb.). Then tighten crosswise to 30 Nm (22.1 ft.lb.). Use counterhold 999 5561.
-
Start tightening with the same screw both times.