V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
-
Squeeze grease into the joint on the surface (2).
Note! There must not be any grease on the mating surface (1).
-
Apply a thin layer of liquid gasket to the mating surfaces (1) on both the joint and the rear cover.
-
Install the rear cover on the propeller shaft. Ensure that the holes are aligned.
-
Install:
-
the propeller joint on the propeller shaft. Knock it into place using a rubber mallet. Use a socket as a spacer for the last bit.