V70R AWD L5-2.3L Turbo VIN 62 B5234T8 (1999)
Install:
-
connector at the bottom of the control module box.
-
cable on the side of the control module box.
-
screws to the clamp in the side of the control module box.
GC8 Installing Middle Section:
Install:
-
control modules holder, ensure that the clips engage.
-
cable duct, locate in control module box slot.
-
sleeve connector to control module box air intake.
-
middle section to control module box.
NOTE: Check that the middle and lower sections of the control module box are sealed and that the clips are properly engaged.
GC9 Installing Control Modules: