V90 L6-2.9L VIN 96 B6304S (1998)
-
Replace drive cable in drive gear, tighten plate.
Reinstalling drive gear
-
Reinstall drive gear. Tighten in place using the two screws.
CAUTION: Reinstall circlip.
Reinstalling
-
Reinstall drive cable in motor.
-
Reinstall seat left bracket.
Reinstalling brackets
-
Reinstall brackets with the three motors.
Finishing off
-
Reinstall seat in car.
-
Cars with SIPS airbag: remove the safety device.
-
Replace battery negative lead.
Right Rear Motor Cable Replacement
WARNING: Seats with SIPS bag must always have the transport safety device installed in order to avoid accidentally activating the system
