V90 L6-2.9L VIN 96 B6304S (1998)
Loosen mounting bolts approx. 10 - 15 mm (0.4 - 0.6 inch) and lower tank.
AG8. Remove cable clip in floor
AG9. Disconnect cable at rear
Note: Cable quadrant is not attached to rear axle on later versions.
AG10. Install new cable.
AG11.Run new cable carefully over fuel tank
Take care to avoid damage to plastic coating on cable. Insert cable and rubber gaiter through hole in body.
AG12. Connect cable at rear
AG13.Install clip at colour marking
Turn clip towards right.
