V90 L6-2.9L VIN 96 B6304S (1998)
Water Pump: Service and Repair
1. Drain coolant
-
Open drain cock on right-hand side of cylinder block.
-
Remove expansion vessel cap.
-
Fit tube to drain cock to collect coolant.
-
Close drain cock.
2. Remove timing belt
-
Remove timing belt as described in steps 1 through 6 of replacement. See: Engine/Timing Components/Timing Belt/Service and Repair
3. Remove coolant pump
-
Remove bolts (seven).
4. Clean joint face and mating surfaces
-
Scrape gasket remains from cylinder block.
Install coolant pump
-
Use new gasket.
-
Tighten mounting bolts alternately to 20 Nm (15 ft.lb).