V90 L6-2.9L VIN 96 B6304S (1998)
Connecting Rod: Technical Service Bulletins
Connecting Rod Cap - New Screws
Section
2
Group
21
No.
0005
Year
98
Month
03
Reference:
TP 2103201, Section 2(21) Engines B6244, B6254, B6304; 960 1991-
New screws for connecting rod cap
Background:
A new screw for the engine connecting rod cap has been introduced from and including model year 1998 for all S90/V90 gasoline engines.
The new screw has a closer pitch of thread.
At the end of model year 1997 production approximately 800 engines were manufactured with this new type of screw. It is therefore important to check
which type of screw the engine is equipped with if an engine from a model year 1997 car is being renovated, and whether the screw needs to be replaced.
When replacing screw, it must be replaced with same type of screw, in other words with the same pitch of thread.
This Service Bulletin describes how to spot the difference between the old and the new type of screw, and within which engine serial numbers mixed
screw types are to be found.
Screw type
Engine serial number
Notes
Only older screws
-1051765
Mixed old and new screws
1051766 - 1052536
A) see below
Only older screws
1052537 - 1059933
Mixed old and new screws
1059934 - 1059984
B) see below
Only new screws
1059985-
A)
The following engines have NEW screw:
1051766-1051771, 1051778-1051783, 1051796-1051801, 1051814-1051819, 1051844-1052225, 1052240-1052245, 1052252-1052257,
1052264-1052269, 1052276-1052281, 1052288-1052293, 1052300-1052305, 1052312-1052317, 1052324-1052329, 1052336-1052341,
1052348-1052365, 1052384-1052389, 1052396-1052401, 1052420-1052425, 1052438-1052443, 1052462-1052467, 1052480-1052497,
1052504-1052536
B)
The following engines have NEW screw:
1059934-1059935, 1059942-1059947, 1059954-1059959, 1059966-1059977
Tools
Thread gauge M9 x 1.0
1158902-5 (or equivalent)
Thread gauge M9 x 1.25
1158901-7 (or equivalent)
New screws for connecting rod cap