V90 L6-2.9L VIN 96 B6304S (1998)
Drive Belt Tensioner: Service and Repair
1. Remove auxiliaries drive belt
-
Use jointed handle with 3/8 inch drive to relieve belt tensioner and slacken belt.
-
Remove belt.
2. Replace belt tensioner
-
Undo tensioner bolts (two) and remove tensioner.
-
Install new tensioner. Tighten to: 20 Nm (15 ft. lbs.).
Belt Routing B6304
3. Install drive belt
-
First. place belt around crankshaft pulley.
-
Then, position around AC compressor, idler pulley, alternator and servo pump.
-
Tension tensioner and place belt in position.
Check operation of tensioner
