V90 L6-2.9L VIN 96 B6304S (1998)
Oil Cooler: Service and Repair
1. Remove thermostat unit
-
Jack up car.
-
Remove splash guard under engine.
-
Disconnect oil lines at unit.
-
Mop up oil spillage.
-
Remove mounting bolts (two).
2. Install new unit
-
Clean mating face.
-
Use new gasket.
-
Install unit.
Tighten to: 20 Nm (15 ft. lbs.)
3. Reconnect oil lines
-
Tighten to: 30 Nm (22 ft. lbs.)
-
Install splash guard under engine.
-
Lower car.
-
Check oil level.
-
Test-run engine.
-
Inspect for leaks.
