V90 L6-2.9L VIN 96 B6304S (1998)
Raise the car.
Remove the splashguard under the engine.
Drain the engine oil and remove the oil filter.
Remove
-
the mounting brackets for the anti-roll bar. Allow the anti-roll bar to hang
-
the remote oil filter
-
the 4 mounting screws for the wiring harness from the engine
-
the pre-heating pipe
-
the upper screw for the steering joint.
Note! Remember the safety catch for the steering shaft joint.
Release the oil cooler from the sump. Hang up at the rear.
Disconnect the power steering pipe from the clip mounting.
Lowering the front suspension
Position the mobile jack under the front suspension member. Use lifting plate 999 5972.
Secure using an M8 screw in the member.