V90 L6-2.9L VIN 96 B6304S (1998)
12. Install fuel distribution manifold and injectors
-
Inspect injector O-rings. Lubricate with water-free Vaseline.
-
Reconnect fuel pressure regulator vacuum hose.
-
Press fuel distribution manifold into position.
-
Tighten manifold.
-
Reconnect injector connectors.
-
Reconnect ECC vacuum hoses (two).
-
Reinstall injector cover.
13. Install/reconnect:
-
throttle cable
-
cruise control vacuum unit
-
vacuum hoses (two) to throttle housing,
-
throttle pulley cover
14. Install air mass meter and intake hose
-
Reconnect crankcase ventilation hoses (two).
-
Reconnect idling valve teed and air hose.
-
Reconnect air mass meter and throttle housing connector.
-
Install cable bracket a, throttle pulley.