V90 L6-2.9L VIN 96 B6304S (1998)
Camshaft Oil Seal: Service and Repair
SPECIAL TOOLS
-
Counterhold tool No. 999 5199, or equivalent
-
Drift tool No. 999 5449, or equivalent
-
Drift tool No. 999 5450, or equivalent
PROCEDURE
NOTE: Proceed to step 5 if replacing rear camshaft seals only.
1. Remove timing belt
Disconnect battery ground lead.
Remove Timing Belt as described in Replacement steps 1 through 6.See: Timing Components/Timing Belt/Service and Repair
2. Remove camshaft pulleys
Use counterhold tool No. 999 5199, or equivalent.
NOTE: Do not turn camshafts independent of crankshaft while belt is removed.
3. Remove front seals
-
Pry out seals carefully using screwdriver, taking care to avoid damaging sealing faces on shafts and in seats.
Clean seats and inspect shafts for signs of wear.