volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Testing Notes|Page 720 > < Testing Notes|Page 718
Page 4
background image

Checking Pressure Regulator, Lowering Pressure

-

Connect vacuum pump 999 5843 to pressure regulator.

-

Pump air out of regulator.

-

Check that line pressure rises by the same amount as the pressure in the regulator drops. 300 kpa (42.6 psi) - negative pressure = line pressure.

-

Disconnect hose from pressure tester. Line pressure should return to 300 kPa (42.6 psi)

If pressure is OK:
^

Proceed to: Checking Pressure Regulator, Increasing Pressure section below.

If pressure is NOT OK:
^

Replace pressure regulator.

Checking Pressure Regulator, Increasing Pressure

-

Connect pressure tester 998 5496 and manometer 999 5230 to pressure regulator.

-

Pump up the pressure in the regulator.

-

Check that line pressure rises by the same amount as the pressure in the regulator. 300 kpa (42.6 psi) - negative pressure = line pressure.

-

Disconnect hose from pressure tester. Line pressure should return to 300 kPa (42.6 psi)

If pressure is OK:
^

Proceed to: Checking Residual Pressure section below.

If pressure is NOT OK:
^

Replace pressure regulator.

Testing Notes|Page 720 > < Testing Notes|Page 718