V90 L6-2.9L VIN 96 B6304S (1998)
4. Remove cap and nut:
-
Cap, use a cold chisel and tap around.
-
Nut use suitable wrench.
CAUTION: The cap and nut are not reusable.
5. Remove hub nuts.
-
Use a long shaft and a 36 mm socket.
6. Remove hub from stub axle:
-
Hold sleeve against the end of the stub axle.
-
Pull the hub off carefully.
-
Counterhold the inner bearing ring as soon as there is space.
Press on the hub until the sleeve bottoms out.
This is to prevent the bearing rings falling out.
7. Press down the pulse wheel for ABS brakes.
Use drift and spacer.
Counterhold with counterhold.
