V90 L6-2.9L VIN 96 B6304S (1998)
Installing Throttle Body
-
Install the new throttle body on the intake manifold.
-
Connect connector to throttle position sensor.
Checking Link
-
Undo link locknut.
-
Pull back link as far as possible, release one end and check that the link springs back easily to innermost position.
Installing Link
-
Locate link.
-
Check that throttle spindle is in contact with adjustment screw (A) and that throttle pulley is in contact with idling stop (B).
-
Tighten link locknut (C).
-
Open and close throttle, check that the throttle spindle is in contact with the adjustment screw (A) when the throttle is closed.