V90 L6-2.9L VIN 96 B6304S (1998)
Fuel Pressure: Testing and Inspection
While Car Is Being Driven
Special Tools:
^
951 2614
^
981 2270
^
981 2273
^
981 2282
^
998 9725
^
999 5011
Installing Pressure Gauge
-
Supplement pressure gauge 999 5011 with nipple 998 9725 and adapter 999 2614.
-
Connect other pressure gauge connector to fuel draining unit 981 2270, 981 2273 and 981 2282.
-
Protect metal components and connectors with foam rubber to avoid scratching the dashboard and paint- work.
Routing Pressure Hose
-
Remove the protective cap from nipple on the fuel rail at the rear of the engine.
-
Install the adapter hose nipple loosely on the nipple on the fuel pressure line. The nipple will be tightened later.
-
Arrange hose as shown.
NOTE: Ensure that the hose follows the rubber trim on the plenum chamber and then out of the engine compartment at the rear corner of the
bonnet, with the adapter hose joint at the T-valve outside the engine compartment, so the neither the bonnet or the hose are damaged when the
bonnet is closed.
