V90 L6-2.9L VIN 96 B6304S (1998)
Checking Key Lock Function
-
Move gear selector lever to position P
-
Ignition key should be easily removable from ignition switch
-
If key cannot be removed, cable is too short. Adjust cable sleeve at gear selector lever end until key can be removed easily.
-
Move gear selector lever to position other than P.
-
Ignition key should not be removable from switch.
-
If key can be removed, cable is too long. Adjust cable sleeve at gear lever end until key cannot be removed.
-
Check shift lock override function.