V90 L6-2.9L VIN 96 B6304S (1998)
6. Remove pressure pipes from pump:
-
Place a container under the power steering pump.
-
Cover generator (GEN) with clean paper.
-
Remove the old O-ring.
-
Carefully cut the return pipe a little.
NOTE: The hose should not be cut behind the tape markings on the pipe ends. Be careful with the reservoir terminals.
7. Drain the system of oil.
-
Raise front suspension so that wheels hang free.
-
Turn the steering from lock to lock.
-
Ensure that no fluid drips into the generator.
8. Mount the pump in a vise and remove the pulley.
-
Use puller to remove the pulley
COMPONENT REPLACEMENT
1. Install pulley
-
Lubricate pump shaft with oil.