V90 L6-2.9L VIN 96 B6304S (1998)
-
Remove steering wheel module.
Carefully lift out the steering wheel module and disconnect the connector from reverse of the module.
Remove steering wheel module
WARNING:
-
The Steering Wheel Module Must Never Be Taken Apart, Repaired Or Moved To Another Vehicle.
-
Under No Circumstances Use An Ohmmeter Or Other Live Measuring Instrument To Take Readings On A Disconnected, Non-deployed
Airbag Module.
-
This Could Deploy The Airbag.
-
If A Non-deployed Passenger Module Is Removed Temporarily, It Should Be Placed With The Metal Side (rear) Downwards In A
Protected Place (the Cargo Compartments For Example).
-
Installing special tools.
Install special tool 998 8695 to SRS ignition cable connector.
This makes it possible to drive the car without the SRS on-board diagnostic (OBD) system registering a diagnostic trouble code (DTC).
If the ignition is switched on when neither steering wheel module nor special tool are connected, an open-circuit DTC will be stored. (Any
DTC must be erased.)
2. Adjusting the front wheels:
