V90 L6-2.9L VIN 96 B6304S (1998)
-
Install brake caliper with new screws.
Tighten to 60 Nm (47 ft. lbs.).
2. Install support arm.
-
Install all screws but do not tighten.
-
Tighten the rear screw.
Tighten to 80 Nm (63 ft. lbs.).
-
Tighten front nut.
Tighten to 80 Nm (63 ft. lbs.).
-
Tighten remaining screws.
Tighten to 50 Nm (37 ft. lbs.).
3. Install damper (shock absorber):
-
Standard dampers:
Compress damper by hand and hook on.
Use new screws.
Tighten to 80 Nm (63 ft. lbs.).
-
Self-levelling dampers:
Release pressure from compression tool and install damper.
Push up to normal position.
Use new screws.
Tighten to 80 Nm (63 ft. lbs.).
-
Install new screws on the anti-roll bar both sides, do not tighten.
-
Remove The Compression Tool.
-
Install the wheel.
4. Lower car completely.
-
Tighten anti-roll bar screws.
-
Tighten to 80 Nm (63 ft. lbs.).
