XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
-
Remove the C-pillar panel by carefully pulling it out at the lower edge so that the two retaining clips release.
-
Pull it out at the upper edge until the last clip releases.
-
Carefully unhook it from the roof panel.
-
Take the angled end of a scriber and pull off the cover washers for the screws for the load securing eyelets.
-
Remove the screws for the load securing eyelets and the screws at the front edge of the side panel.
Illustrations A and B