XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
-
Clamp the cable at the hole edge using a cable tie with edge clips.
-
Insert the piece of wire through the boot lid's rubber grommet.
-
Tape the connector and a piece of the cable at the wire.
-
Lubricate the taped connector with low temperature grease.
Note! The low temperature grease must not contain water.
-
Remove the tape and wire spring.
-
Insert the cable through the hole in the body.
Part 2
Parking assistance, camera (Continued)
Illustration A