volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Checking AUX-Panel|Page 12526 > < Checking AUX-Panel|Page 12524
Page 1
background image

Auxiliary Input / Output Jack: Testing and Inspection
Checking Accessory USB Unit (AUU)

Checking Accessory USB unit (AUU)

Information

The fault may be caused by:

-

Malfunction in external sound source.

-

Faulty software.

-

Loose connections in leads.

-

Internal fault in the Accessory USB unit (AUU).

Remedy in the following order.

Check function of the external sound source.
Load the Accessory USB Unit (AUU) with new software.

Continue -  Verification 

-------------------------------------------------

Verification

Corrective actions

-

Ignition switch position II.

-

Check that the external sound source is connected correctly to the control module.

-

Check function of the Accessory USB Unit (AUU).

Is the function OK?

Yes - FAULT FOUND

No -  Information 

-------------------------------------------------

Information

Remedy in the following order.

-

Check the connectors and cables. Check especially the USB-connection for loose connection.

Other information:

-

Signal specification See: Testing and Inspection/Pinout Values and Diagnostic Parameters/Signal Specification, Accessory USB Unit (AUU) 

-

Location of components See: Locations 

-

Universal Serial Bus (USB) Module See: Entertainment System Control Module/Service and Repair/Universal Serial Bus (USB) Module 

Continue -  Verification 

-------------------------------------------------

Verification

Corrective actions

-

Ignition switch position II.

-

Check that the external sound source is connected correctly to the control module.

-

Check function of the Accessory USB Unit (AUU).

Is the function OK?

Yes - FAULT FOUND

No -  Information 

-------------------------------------------------

Checking AUX-Panel|Page 12526 > < Checking AUX-Panel|Page 12524