XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
-
Route the wiring harness to the right toward the tow bar and clip it to the connector bracket on the right-hand side of the connector using a cable
tie.
-
Route the wiring harness as illustrated and clip it to the left-hand bracket for the radiation shield using a cable tie with clip. Attach the clip so that
the wiring harness comes away from the sharp edge of the bracket.
-
Adapt the length of the wiring harness from the radiation shield's clamp to the rubber grommet.
-
Push the new rubber grommet into the floor.
-
Fold up and secure the insulating mats.
