XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
-
Rivet the lower section of the skid plate at the bumper cover using pop rivets.
Applies to all models
-
Align the bracket with the connector so that it is straight. Ensure that it does not catch on the bumper cover/skid plate or that the cable does not
chafe on the skid plate/bumper cover.
-
Tighten and torque tighten screws/nuts to 24 Nm (18 lbf.ft.).
-
Tighten the cable tie around the hook.